Products

3D Series

SPHERE ARP3DL

Features Easy Vehicle Selection – Quick vehicle entering Easy Data: – Data management and display program in WINDOWS environment – Data bank with more than 90.000 vehicle data sheets – Customer data bank for recording 20.000… View Article

SPHERE ARP3DSP

Features Easy Vehicle Selection – Quick vehicle entering Easy Data: – Data management and display program in WINDOWS environment – Data bank with more than 90.000 vehicle data sheets – Customer data bank for recording 20.000 jobs… View Article

Dynamic WS

DYNAMIC WS

Features 3D INFO – The movie program, through interactive 3D graphics, displays the sequence of the operations necessary for a correct adjustment of the vehicle. This program is also accessible during adjustment procedures SPOILER PROGRAM – A special… View Article

Matrix WD / Matrix WS

MATRIX WS - WD

Features QUICK RUN OUT – It is possible to measure wheel run out by moving the vehicle by only 30° (quick compensation in a little space)*  without lifting the vehicle SPOILER PROGRAM – A special Spoiler Program… View Article

Active Plus WS

ACTIVE PLUS WS

Features Data Bluetooth transmission allows maximum mobility between different working positions. The aligner is equipped with a powerful PC, a A4 printer and an useful compartment for wheel clamps deposit. Quick entering by model or V.I.N. number… View Article

Active WS

ACTIVE WS

Features QUICK DATA – Quick entering by model or V.I.N. number QUICK DIAGNOSTIC – The quick measurement of axle set back, wheelbase and track-width, may highlight any errors in the vehicles body and chassis symmetry QUICK RUN OUT… View Article

Accessories

Trucks

MATRIX TRUCK

Features The keyboard with remote-control function provides total “on vehicle” operation so the control unit only needs to be used at the start and end of test Data management and display program in WINDOWS environment Data… View Article

Aligner Connect

Cars

PRO-LANE

Features Test and diagnosis system for cars and light commercial vehicles sets today’s standards for vehicle testing. Developed to grant modularity and user-friendliness, it incorporates latest-generation equipment in conformity with applicable safety regulations for the periodical testing… View Article

Cars & Light Vehicles

Commercial vehicles

Motorcycles

Accessories

Play detector

The equipment generates an alternate stress on the wheels and, therefore, on the organs of the steering wheel and suspensions, allowing a visual check of any defects (clearance of the spherical couplings, silent block, damper attachment,… View Article

Headlight Beam Tester

CFD102 Mechanical headlight beam setter with digital luxmeter, based on wheels, laser visor, laser pointing system. Laser Visor + Laser pointing system HALOGEN, XENON, LED LIGHTS: combining new technology applied on software solutions and improving structure… View Article

Car

ER 280 - ER 320 SERIES

Features Efficiency and money saving. Modern balancing system to minimize wheel weights consumption. Faster balancing thanks to less wheel spins and repositionning. Digital calliper with optical sensor, with alloy shaft sliding on bushes. Automatic storage of distance… View Article

ER 255R - ERP 255R

Features Start-up by keyboard or by lowering the wheel guard Possibility of inspection run with wheel guard up Multi-operator function ALU programs and motorcycle programs (static and dynamic) Automatic ALU S and PAX programs Optimisation between… View Article

ER 248R - ERP 248R

Features Start-up by keyboard or by lowering the wheel guard Possibility of inspection run with wheel guard up Stop on top for immediate application of the external weight Multi-operator function ALU programs and motorcycle programs (static… View Article

Balancers Accessories


Notice: Undefined index: file in /var/www/vhosts/spacetest.com/httpdocs/wp-includes/media.php on line 1380
Locking units GAR345 Double centering   GAR101   GAR102   GAR104   GAR105   GAR108 (➔ AIR LOCK)   Centering cones GAR111 (Ø 44-112 mm) Car   GAR112 (Ø 95-132 mm) Off-road vehicles   GAR323 (Ø… View Article

Trucks

ERL - Truck Series

Features These versatile machines are designed for easy, fast and accurate balancing of motorcycle, car and commercial wheels. Microprocessor controlled with self-calibration and self-diagnostics. Specific balancing programs for static, dynamic and ALU wheels (light alloy). One… View Article

ER240 STRADA

Features Mobile truck balancer for closed vans and trailers.Ideal for roadside tyre service, it is suitable for both truck and car tyres (with optional accessories). This versatile machine is designed for easy, fast and accurate balancing… View Article

Bike

BIKE TYRE SERVICE

Features Microprocessor system with self-calibration, self-diagnosis and specific features for static balancing and alloy rims. Multifunction and interactive keys to guide the operator Backlit monochrome  graphic LCD display, 1/16 VGA. Models ER 150H Compact hand spin machine to… View Article

Automatic

GA1441 SERIES

Features Heavy duty structure to guarantee proper working conditions at all times Metal side cover Grease bucket support Bead breaker – galvanised cylinder with simple operation Tool with intergrated protection for alloy rims Pedal assembly -… View Article

GA2441 SERIES

Features Heavy duty structure to guarantee proper working conditions at all times Metal side cover Grease bucket support FL unit V-TYPE = Double rotation speed I-TYPE =  Models with tubeless tyre inflation system Models     IN… View Article

GA2641 SERIES

Features The frame is large and reinforced, to grant the utmost rigidity to the structure and chucking table. The gear box is installed between two steel plates, to avoid flexion during operation. The extra height of the vertical post… View Article

GA2645 SERIES

Features The roller facilitates the  movement of the arm during tool positioning Tool with intergrated protection D-VERSION = INVEMOTOR 0-15 RPM VARIABLE SPEED + Bead-breaker adaptor with tilting adjustment The bead breaker opening can be adjusted to work with… View Article

Leverless

GA560.30 GIOTTO

Features Intuitive Controls Syncro Rollers – The bead-breaking is performed by means of two rollers with a synchronized movement. The bead-breaking of both sides is quickly performed. Easy Demounting – The tool enters between bead and rim. Levering on… View Article

J-AUTOLEVER

Features D VERSION INVEMOTOR 0-15 RPM – Variable Speed V VERSION – Double Speed Patented lever-free tool – Fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers The exclusive… View Article

Top Line

MAXIMA ERGOLOCK

Models GA465.EL GA445.EL Professional tyre changer for intensive use, it offers all the features requested by the most demanding operators and tyre specialists. Its hydraulic bead loosener enables the user to handle every kind of wheel… View Article

Semi-automatic

GA2040 - GA2240 SERIES

Models GA2040.18 Optimised structure to offer the best value for money. GA2240.18 – GA2240.20 – GA2240.22 Heavy duty structure to always guarantee proper working conditions Galvanised cylinder with double operation Rigid self-centering chuck and wide clamping range The… View Article

Accessories

Trucks

GG516N

Models The GG516N is a one-of-a-kind. It is equipped with four rollers with a unique form, positioned on the two sides of the wheel in diametrically opposite positions.With this system, the dismounting of the tyre with… View Article

GG526N

Models GG526N The operating dimensions of the clamping unit and of the head-tool carriage allow to work on the whole range of wheels, including super-single. The controls, with lever type hydraulic distributors, enable to regulate the speed… View Article

GG50156.15

Features Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles with rims between 11” and 56”. The dimensions and work strokes are such as to ensure maximum efficiency for the entire range of tyres. The chucking table can… View Article

GG40256.11

Models GG 40256.11SL GG 40256.11ST Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles. Double Rotation Speed Double speed for chucking table rotation. Double Speed Movements Double speed on hydraulic movement. GG40256.11ST Manual lifting of the… View Article

GG30156

Features Quick Manual Rotation – Tool rotation with quick unlocking device Minimum Height 300 Mm (12”) Double Rotation Speed – Double speed for chucking table rotation Minimum Clamping Ø 90 Mm (4”) Tube And Tubeless Models GG 30156.13EI Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles. Controls on mobile unit. GG 30156.13… View Article

GG60360.15

Models GG60360.15 GG40256.15 GG40256.15SL Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles. The dimensions and work strokes are such as to ensure maximum efficiency for the entire range of tyres. Electro-Brake Standard (GG60360.15 – GG40256.15) Option (GG40256.15SL)… View Article

GGRS926 - GGRS926ST

Models GGRS926 Hydraulic chucking table. Suitable also for agricultural tyres. GGRS926ST Truck tyre changer for both road-side and workshop service, suitable for closed vans  and/or small workshops. Central docking with ring nut. Technical data   GGRS926 GGRS926ST… View Article

GGRS926.MOVI

Retractable truck tyre changer suitable for closed vans. Ideal for road-side tyre service, it is suitable for both truck and also for agricultural tyres. Electro-hydraulic movements. Bluetooth controls. Hydraulic chucking table. STAND-BY FUNCTION After 5 sec…. View Article

Bike

BIKE TYRE SERVICE

Features Microprocessor system with self-calibration, self-diagnosis and specific features for static balancing and alloy rims. Multifunction and interactive keys to guide the operator Backlit monochrome  graphic LCD display, 1/16 VGA. Models ER 150H Compact hand spin machine to… View Article

Commercial Vehicle Platform Lifts

SF7700 SERIES

Features Synchronised platform movement, indipendent from load distribution, with patented control and adjustment device Mechanical, hydraulic and electronic safety devices in conformity with applicable European Standards Wiring circuit with low-voltage controls (24 volts) Articulation pins with… View Article

SF8800 SERIES

No cross rails or torsion bars between lifting platforms. Maximum accessibility in the working area. Electronic synchronisation of the platforms, independently from the load distribution. Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum… View Article

Electro-hydraulic mobile column lifts

SM295H - 297H – 298H

Features Electro-hyrdraulic operating lifts Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture Self-controlled lowering speed Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in… View Article

SM307HWS - 308HWS WIRELESS

Features Control panel available on each column All columns are identical Configuration sets: 4-6-8 columns Mechanical locking system/parking Wireless 2.4 GHz  communication among columns Automatic selection of  transmission channel with display indication Operation Modes All – Simultaneous operation… View Article

Electro-mechanical mobile column lifts

In-ground heavy duty lifts

SDI Truck Series

Features DOUBLE SAFETY The outer cylinder serves exclusively for lifting and lowering. The innerlying, second cylinder cares exclusively for safety. Both cylinders are hermetically separated from one another by two independent hydraulic circuits. Furthermore, the integrated… View Article

Electro-mechanical 4 post lifts

Wheel-Free Jacks

Wheel-Free Jacks

J20 Series – 2.000 kg Great lifting height Translation device on elastic rollers Automatically-engaging and pneumatic-release mechanical lock device Two-hand “deadman”lowering control   Hydraulic wheel-free jack with hand- pump Air-hydraulic wheel-free jack   J20 NX, NXL,… View Article

Bike

SB 1394 - 1396

Features SB1394 – SB1394P / kg 400 Pantograph lift with foot-operated hydraulic pump (SB1394) or with air-hydraulic pump (SB1394P). Lifting height of 800mm. The particular design of the run-up ramp allows easy rear wheel removal. SB1396P – SB1396E… View Article

Mid-rise lifts

Scissors lifts

SF SERIES

Features Lifts with flat platforms Lifts with large size platforms and sturdy structure assuring maximum rigidity and working stability Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing… View Article

SFL SERIES

Features All pivot points made with self lubricating bushings for long life CE approved lift with low voltage controls No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area) Every… View Article

Double scissors

SFL 5518 - 5535 - 5540

Features Low Profile – No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area). Hydraulic levelling system, by means of a patented synchronisation device, assures constantly the level of the lifting platforms… View Article

In-Ground Piston Lifts

SDI SERIES

Models SDI 120 / 3500 kg The run-up ramps can easily and quickly be blocked in horizontal position to serve as platform extensions. Min. height: 95mm. SDI 120M / 3500 kg Adjustable distance between the platform for… View Article

Hydraulic

Electro-mechanical

SDE SERIES

Features Lifting height over 2 metres Steel high resistance rolled screws, to provide long life Main nut made of bronze (no plastic) with high resistance to wear, for greater safety Automatic and permanent nut lubrication system… View Article

SDB - SDC SERIES

Models SDC = CHAIN TRANSMISSION SDC 2305 – 2700 kg SDC 2306 – 3200 kg Lift with base for easier installation on low quality floors.Min. pad height of 95mm. Two stage short arms. High resistance chain transmission. Pre-tensioned… View Article

SDE 5 SERIES

Features CE approved lift with low voltage controls Lifting height over 2 metres Specially manufactured motors fitted with overheating protection switch Steel high resistance rolled screws, to provide long life Main nut and safety nut made… View Article

SDE 2235LLK

Features Lift for luxury sport cars. Equipped with 4 long two stage low profile arms for easy positionning under low ground clearance vehicles. Minimum height of the pads 76 mm. Arms produced in special steel to… View Article

Rubber pads and supports

Accessories

Four posts lifts Electro-hydraulic

SQ 505 OFSI - 506 OFSI

Features Open Front – Full access to the working area Lift Table Multi-Position (SQ506OFSI) – The 5700 mm long platforms and the large inner distance between posts allow optimum lifting of light commercial vehicles and long-wheelbase vans Models SQ 505… View Article

Tyre Profiler

Other products

Play detector

The equipment generates an alternate stress on the wheels and, therefore, on the organs of the steering wheel and suspensions, allowing a visual check of any defects (clearance of the spherical couplings, silent block, damper attachment,… View Article

Headlight Beam Tester

CFD102 Mechanical headlight beam setter with digital luxmeter, based on wheels, laser visor, laser pointing system. Laser Visor + Laser pointing system HALOGEN, XENON, LED LIGHTS: combining new technology applied on software solutions and improving structure… View Article

Tyre Inflation

AUTOMATIC DIGITAL INFLATOR Equipped with a metal keypad to guarantee durability and resistance to wear. To achieve perfect inflation it is simply a matter of keying in the required pressure and pressing a button: the compressor… View Article

Presses

Hydraulic presses with hand pump, two automatic speeds and calibration valve. PX30 Capacity: 30 ton Weight: 230 kg PX15 Capacity: 15 ton Weight: 130 kg